Location: Illinois, United States
EV Hover v4 - Electric Vehicle Cable Management System (Up to 9 1/4 ft with the extender)
Adjustable Arm for your Electric Vehicle Charging Cable
Free shipping (US only)
Adjustable Arm for your Electric Vehicle Charging Cable
Features
• Eliminate the trip hazard
• Keep your cable clean
• Easy installation
• Extends to 6 1/4 ft (Up to 9 1/4 ft with the extender!)
• Folds away against the wall
• Made of Powder-Coated Steel and Aluminum
• Weatherproof
• Made in the USA
• Limited lifetime warranty
• Patent pending
Our adjustable, extendable arm for your charging cable provides elevated charging for electric vehicle owners everywhere. Rather than twisting under you, your electric vehicle cable will hover above you. Never worry about coiling your cable again.
Improve garage safety, organization, and space efficiency.
Constructed from powder-coated steel and aluminum, and built for everyday use, EV Hover’s superior durability ensures charging is a breeze. Installation is quick and painless and takes less than 10 minutes.
Our extendable arm folds flat against the wall and can be extended as far as 6 1/4 feet (Up to 9 1/4 ft with the extender). The charging cable runs along the length of the arm and hangs down from the hook, allowing for easy access to the charging port.
EV Hover can support any EV Charging Cable.
More EV Hover products
Testimonials
"My search for an effective charging cable management system for my Tesla began when my father-in-law tripped over the cable and took on some significant damage. EV Hover is the only product I could find that solved the problem. The tripping hazard is gone and it folds up nicely against the wall while not in use. It's also super well-built and easy to install." - Joe Solomon
"EV Hover is the charging solution that I have been looking for. I am finally able to walk around the car without tripping and the cables are no longer sitting on the garage floor. The sleek design and product quality are top notch and installation was easy." - Aaron Wasserman
FAQs
• Will this work with all EV Charging Cables?
EV Hover will work with all EV Charging Cables.
• Can the EV Hover extend over my car?
Yes. The EV Hover extends over 6 1/4 feet (9 1/4 ft with the extender) and can be mounted as high on the wall as needed.
• Can I mount it on any surface?
Yes. The EV Hover can be mounted on drywall (into a stud) or masonry (brick, stone and concrete block).
• Will the EV Hover work for other types of cables?
Yes. The EV Hover will work with all cable, cords and hoses.
• Can EV Hover be used outdoors?
Yes. EV Hover is made of powder-coated steel and aluminum and is weatherproof.
More EV Hover products
Specifications
Product Info | 6 1/4' EV Hover - Black without Holster SKU: EVH-V4-6FT-BLK UPC: 196852588756 9 1/4' EV Hover - Black without Holster SKU: EVH-V4-9FT-BLK UPC: 198715531268 6 1/4' EV Hover - White without Holster SKU: EVH-V4-6FT-WHT UPC: 196852164714 9 1/4' EV Hover - White without Holster SKU: EVH-V4-9FT-WHT UPC: 198715037050 |
| Extends | Base Unit: 6 1/4 ft With Extender: 9 1/4 ft |
| Color | Black or White |
| Material | Base Unit: Steel; Extender: Aluminum |
| Finish | Powder Coated |
| Country of Origin | USA |
| Maximum Load | 20 lbs |
Dimensions | |
| Base Unit | 6.33' x 11” x 3” @ 11.9 lbs |
| Base Unit with Extender | 9.33' x 11” x 3” @ 14.9 lbs |
| Folded against wall | 38" x 11" x 3" |
| Individual Arm | 36” x 1 1/2” x 1” |
| Mounting Plate | 11" x 6" x 2 1/4" |
| Velcro Strap | 12" x 1" |
| Holster | Tesla: 5 3/4" x 2 1/4" x 2 1/4" J1772: 5 3/4" x 2 9/16" x 2 1/4" |
*Level is included in the box.
How to Install
Before You Start
To install EV Hover be sure you can:
• Locate a stud or other suitable support in the wall. Know the location of electrical wires in walls
• Drill holes for and install screws
• Lift 15 pounds above your head.
Download PDF Instruction Manual
Video
Important Safety Instructions
Make sure that the materials used and the installation procedures follow local building codes and safety standards. The information provided in this manual in no way exempts the user of responsibility to follow all applicable codes or safety standards. This document provides instructions for EV Hover and should not be used for any other product. Before installation or use of this product, review this manual carefully and consult with a licensed contractor, licensed electrician, or trained installation expert to make sure of compliance with local building codes and safety standards. |
Do not use hoses or power washers on the frame components as this may remove the powder coating.. Do not swing from or add any unexpected load to EV Hover. Only use in conjunction with a certified electric vehicle charge cable. To prevent damage to EV Hover and avoid trapping fingers, do not cut cable straps until after installation. To prevent serious injury or death, make sure all screws are tight and the device is secured to the wall. To prevent serious injury or death, make sure that the electric power socket is grounded. |
To reduce the risk of personal injury, do not bend the arms or brackets when installing or cleaning EV Hover. Do not insert foreign objects into the EV Hover mechanisms. There are no user-serviceable components in the EV Hover. Servicing and repairs are only to be carried out by EV Hover personnel. Maximum load 10lbs. |
-
ManufacturerEV Hover
-
New/UsedNew
-
ColorBlack, White
-
3 Foot ExtenderWithout Extender, With Extender
-
HolsterWithout Holster, Tesla Connector, J1772 Connector (All other vehicles)
- Dimensions
-
Length (in)6.33'
-
Width (in)11''
-
Height (in)3''
-
We ship to the United States and Canada. Worldwide shipping and hazardous materials such as lithium batteries may require a separate estimate.
For any of the products bought online, buyers will request a refund of their order from their account: My Account / My Orders.
Vendors may promptly accept, calculate, and process returns, refunds, or repairs in accordance with the Terms of Use and Vendor’s Agreement.
Vendors may promptly route any payments to customers in connection with the transactions through the Fuel2Electric website or otherwise if all parties agree.
Fuel2Electric’s fees are not refundable, not cancelable.
Fuel2Electric’s “My EV conversion” is not refundable.
